Views: 0 Author: Site Editor Publish Time: 2022-06-23 Origin: Site
Forklifts are industrial transport vehicles used in ports, railway stations, airports, freight yards, factory workshops, warehouses, circulation centers and distribution centers, etc. are widely used. They are used for loading, unloading and handling palletized goods in cabins, wagons and containers. essential equipment.
What are the basic data of forklift trucks?
Why are forklifts becoming increasingly popular with consumers?
How to operate the forklift correctly?
1. Minimum ground clearance: The minimum ground clearance refers to the distance from the fixed lowest point on the vehicle body to the ground other than the wheels, indicating the forklift's ability to cross the elevated ground obstacles without collision. The greater the minimum clearance, the higher the drivability of the forklift.
2. Wheelbase and wheelbase: The wheelbase of the forklift is the horizontal distance between the center lines of the front and rear axles of the forklift. The wheelbase refers to the distance between the centers of the left and right wheels on the same axle. Increasing the wheelbase is beneficial for the longitudinal stability of the forklift, but increases the length of the body and the minimum turning radius. Increasing the wheelbase is beneficial for the lateral stability of the forklift, but increases the overall width of the body and the minimum turning radius.
3. The minimum width of right-angle gear: The minimum width of right angle gear refers to the minimum width of right angle cutting gear so that the forklift can drive back and forth. Expressed in mm. In general, the smaller the minimum width of the right-angle channel, the better the performance.
4. The minimum width of the stacking channel: The minimum width of the stacking channel is the minimum width of the channel in normal operation of the forklift truck.
The forklift design reflects ergonomics in all aspects:
① Reduce the fatigue of the driver during operation: the unique design can reduce the operator's operation actions and make the operation more labor-saving;
② Comfort: The humanized design can keep the driver in a good mood and reduce operating errors;
③ Good visibility: Provide good visibility for forklift operation process, which can not only improve efficiency, but also ensure driver safety.
1. The connection between the lifting cylinder and the portal should be firm, and the hinge between the tilting cylinder, portal and frame should be firm and flexible, and the appropriate clearance should not be too large. The oil cylinder should be well sealed, have no cracks and work smoothly. Under the rated load, the self-lowering amount of the portal in 10 minutes is no more than 20 mm and the inclination angle no more than 0.5°. At full load, the lifting speed should not be less than half the standard value.
2. Driver's canopy and luggage carrier must be complete and effective.
3. The boarding and dismounting of persons on the fork is strictly prohibited and it is not permitted to pick up high and overloaded goods with a single fork.
4. A forklift driver with forklift license is required to avoid multiple drivers for one forklift.
In order to provide the satisfactory products and services, Jiangsu Shangqi Heavy Industry Technology Co. has established a modern quality management system that strictly complies with international standards.
