Publish Time: 2022-05-21 Origin: Site
The snow blower is mainly used in the north where the weather is cold and the snow is heavy. When the heavy snow hinders the traffic, it is applied to the snow blower, and its main function is to remove the snow.
How to use snow blower correctly?
What is the product description of snow blower?
What are the design highlights of the snow blower?
1. Before starting or operating the working device, you should observe whether there are people and obstacles around the vehicle, carefully observe whether there are vehicles and pedestrians in the front and rear, close the door, turn on the turn signal, and start by honking the horn.
2. When the engine is running, it is strictly forbidden to stand between the front and rear tires of the vehicle, between the boom and the front frame, and at the front and rear of the sweeper.
3. The water temperature should not be lower than 50 ℃ when starting, and start with a low gear to avoid rapid acceleration.
4. When the road sweeper is driving, no one is allowed to get on or off the vehicle.
5. Driving after drinking is strictly prohibited, smoking, eating, chatting, making phone calls and listening to headphones are not allowed when driving a vehicle.
6. The driving speed is maintained at 15/h.
7. When the snow blower is driving on rainy, snowy, muddy and residual oil roads, the vehicle should pay attention to anti-skid, avoid rapid acceleration and emergency braking, so as not to lose control and cause accidents.
8. Pay attention to the working conditions of the vehicle, braking, steering, lights and other parts that affect safety. When a fault occurs on the way, you must stop and check, and risk driving is not allowed.
9. When the snow blower is cleaning, the material should be poured out in time when the bucket is full, and the opening and closing of the upper cover of the bucket should be slow and uniform to avoid large impact.
10. When there is entanglement on the sweeping roller of the snow blower, it should be cleaned in time to prevent the normal operation of the sweeper from being affected.
5900 series multi-purpose vehicle snow blower, also known as snow plow, snow plow, snow plow. For snow removal, it is fast and efficient. It is also used for cleaning or storing materials. This snow remover uses snow melting agent, which can remove snow and clean the road while removing water.
Hydraulic drive angle broom: light snow sweeping operation without damaging the road surface.
Compact and operable design: easy to operate, replace manual and hand brooms, and quickly clean small or large areas.
Innovative wavy design: remove every piece of debris and make the roads of parking lot, sidewalk and driveway clearer and cleaner.
To meet these growing demands, Jiangsu Shangqi Heavy Industry Technology Co. has committed to providing the snow blowers, and making them more effective, reliable, and consistent.
Jiangsu Shangqi Heavy Industry Technology Co. Ltd was established in 2 0 0 2 and is located in the economic development zone of Jingjiang city, enjoying convenient transportation and beautiful environment.